Skip to content
Meta

Shopware server-side tracking with the Meta Conversions API

Send every purchase from your Shopware sales channel to Meta from the server through the Meta Conversions API, with Advanced Matching and the script served from your own domain.

Each purchase is confirmed from your Shopware orders and sent to your Meta pixel from the server, through the Meta Conversions API. Nothing in the browser talks to Meta, so an ad blocker has nothing to block. Each event carries hashed customer data for Advanced Matching.

Set it up with AI

Connect your assistant

First time? Add the Product Metrics MCP server to your assistant, then paste the prompt below.

In Claude, choose Add custom connector; in ChatGPT, Settings → Apps & Connectors. Paste this URL:

https://www.productmetrics.io/mcp

Claude Code: run this in your terminal.

claude mcp add --transport http product-metrics https://www.productmetrics.io/mcp

CodexAll clients and details →

Setting it up with AI takes one prompt and 60 seconds: paste it into your assistant.

Set up server-side conversion tracking for my Shopware store in Meta with Product Metrics. Check my setup status first, walk me through each open step, and give me the link when I need to click something.
Set up server-side conversion tracking for my Shopware store in Meta with Product Metrics. Check my setup status first, walk me through each open step, and give me the link when I need to click something.
Set up server-side conversion tracking for my Shopware store in Meta with Product Metrics. Use the Product Metrics MCP server, or the productmetrics CLI with --json and the Product Metrics skills if they are installed (run `productmetrics help agents` first), and tell me when a step needs me in a browser.
Set up server-side conversion tracking for my Shopware store in Meta with Product Metrics. Use the Product Metrics MCP server, or the productmetrics CLI with --json and the Product Metrics skills if they are installed (run `productmetrics help agents` first), and tell me when a step needs me in a browser.

Prerequisites

  • Workspace admin in Product Metrics (editor is enough for the store and destination steps), with Pro (Full Signal Tracking).
  • Your Shopware sales channel connected: Shopware 6.7 (this plugin build supports 6.7.14.0) with PHP 8.2+, an administrator who can upload extensions, Shopware’s scheduled tasks and message workers running, and the channel’s public HTTPS address under Sales Channels → your channel → Domains. You pair one sales channel with a one-time token; it reads Active before you link your property. See Shopware.
  • Access to your pixel in Meta Events Manager, to copy its ID and generate a Conversions API access token.

In the app

1. Connect Shopware and Meta

Store: install the Product Metrics plugin and pair your sales channel with a one-time token and link it to your property. See Shopware.

Open Ecommerce platforms

Go to Integrations → Ecommerce platforms and select Connect on Shopware 6.

The store platform list in Ecommerce platforms: WooCommerce, Magento, Shopware 6, Lightspeed and Custom Store / Webhook Integration, each with a Connect button, with Shopware 6 outlined.

Start the setup

The Shopware 6 page lists three steps: connect your store, install and pair the extension, and link a property. Select Connect Shopware 6.

The Shopware 6 page under Integrations → Ecommerce platforms: 0 of 3 steps done, step 1 Connect your store with the Connect Shopware 6 button, then Install and pair the extension and Link a property.

Enter your shop URL

Enter the Shopware 6 store URL (your storefront’s HTTPS address) and select Create connection. Check the hostname under Confirm Shopware 6 hostname and copy the one-time pairing token.

The Connect Shopware 6 dialog: an empty Shopware 6 store URL field and the Cancel and Create connection buttons.

Install the plugin

Select Setup guide for how to install the Product Metrics plugin in Shopware, pair it with the token and choose the sales channel.

The Shopware 6 setup guide panel in Product Metrics: a Download Word document button, then Before you begin: Shopware administration access, workspace access and a property, the sales channel's public HTTPS URL, and running scheduled tasks and message workers.

Meta: in Events Manager, copy your Pixel or Dataset ID and generate a Conversions API access token, then add both under Tracking → Meta Conversions API → Connect Meta and send a test event. See Meta.

Open Tracking

Go to Integrations → Tracking. Under Destinations, select Meta Conversions API.

Open the Meta panel

The panel lists the events Product Metrics sends and what you need: a Pixel or Dataset ID and a Conversions API access token from Events Manager. Select Connect Meta.

The Meta Conversions API panel, Not configured: Product Metrics sends AddToCart, InitiateCheckout and Purchase from the server to your Meta pixel, with hashed customer data when the shopper consented to marketing, plus revenue, profit, new and returning customer, and LTV events, which also need analytics consent. You need a Pixel or Dataset ID and a Conversions API access token from Events Manager. A Connect Meta button.

Add the Meta destination

Choose the store, enter the Pixel or Dataset ID and the Access token, and optionally a Test event code. Keep Send events to Meta on and select Add destination.

The Add Meta destination dialog for the example store Northwind Outfitters: empty Pixel or Dataset ID, Access token and Test event code (optional) fields, each with where to find it in Events Manager, the Send events to Meta switch on, and the Cancel and Add destination buttons.
Example data.

Create custom conversions in Meta

In Events Manager, create a custom conversion for each Product Metrics event you want to measure, using the event names listed in the panel.

The Set up custom conversions in Meta section of the Meta Conversions API panel: the steps in Events Manager, then a table of each conversion and its event: New customer revenue PMNewCustomer, New customer profit PMNewCustomerProfit, Returning customer revenue PMReturningCustomer, Returning customer profit PMReturningCustomerProfit and Order revenue PMOrderRevenue.

You should see: in Product Metrics, the store reads Active after Verify connection; Events Manager shows the test event under Test events.

Using Shopware’s own cookie manager? Leave Tracking → Configure consent on Not configured: the extension adds a Product Metrics measurement group with Product Metrics analytics and Product Metrics advertising attribution. Choose OneTrust, Cookiebot, Usercentrics or Osano only if your shop shows one of those banners instead. See Consent.

Open Tracking

Go to Integrations → Tracking. The checklist shows six steps: start by connecting your store, or use Cloudflare Tracking if you have no store platform.

Tracking in Product Metrics with the Complete your tracking setup checklist of six steps, starting with Connect your store.

Follow the next step

Once your store is connected and linked, the checklist opens the next open step. Each step says what it does.

The Complete your tracking setup checklist in Tracking: 3 of 6 essential steps completed, with Connect your store, Link the store to this property and Install storefront tracking ticked, and Configure consent open as step 4 with the consent platform still Not configured.

Configure consent

Under Configure consent, pick the cookie consent platform your storefront uses. The storefront script collects nothing until the visitor agrees.

The Consent management panel in Tracking: the storefront script collects nothing until your cookie banner says the visitor agreed, a Not configured status, and the Consent platform dropdown.

Meta has no consent mode. Product Metrics sends an event only when the visitor allowed ad user data; the custom events also need analytics consent. A wrong banner here means nothing reaches Meta.

You should see: Configure consent names the banner your sales channel actually shows.

3. Create custom conversions

In Events Manager, create a custom conversion for each Product Metrics value you want to bid on, with the rule pm_purpose equals the purpose: PMOrderRevenue (ORDER_REVENUE) for revenue, PMOrderProfit (ORDER_PROFIT) for profit, every other event in Meta events. Follow Create custom conversions in Meta once a test order has reached Meta.

You should see: your custom conversions show in Events Manager.

4. Check it works

Place a paid test order through the paired sales channel with your payment provider’s test mode, and give Shopware a few minutes to sync it.

You should see: your cookie banner lists Product Metrics measurement (with Shopware’s own cookie manager); in Events Manager, the order shows as Purchase, plus the Product Metrics custom events your visitor’s consent allows. More checks: Check tracking works.

How it works on Shopware

On Shopware
Script and collector served byThe Shopware extension, on a path generated for your sales channel (/<random>/c/<token>). No Cloudflare step, no script tag; one installation tracks one sales channel
Purchase confirmed fromYour Shopware orders
SentWhen the order from the paired sales channel is paid
DeliveredServer-side, through the Meta Conversions API: Purchase plus the Product Metrics custom events
Refunds and cancellationsSent events aren’t revised. Meta refuses events more than 7 days old
Consent read fromShopware’s own cookie manager, or OneTrust, Cookiebot, Usercentrics or Osano

Troubleshooting

ProblemFix
The event isn’t in Meta’s custom conversion selectorMeta lists an event only after it received it. Place a test order with all cookies accepted, then create the custom conversion.
Nothing reaches MetaCheck that Tracking → Configure consent names the banner your store shows, or reads Not configured if it uses Shopware’s own cookie manager.

FAQ

Can I keep the Meta pixel on Shopware?

Yes. Meta counts an event once when the pixel and the Meta Conversions API send the same event name and event ID within 48 hours. Purchase uses the order transaction ID, so it deduplicates on its own.

Which Shopware sales channel is sent to Meta?

Only the one paired with the extension: one installation tracks one sales channel, and its paid orders go to Meta.

Are past Shopware orders sent to Meta?

No. Meta refuses events more than 7 days old, so only orders paid after tracking is live are sent.

What customer data does Advanced Matching send to Meta?

With marketing consent, each event carries the hashed email, name, postal code and country, plus IP address and browser, through the Meta Conversions API. See Meta Conversions API on Shopware.

Where next

On the website: Full Signal Tracking, ad blocker conversion tracking check, first-party cookie, Product Metrics for Shopware

Developers: do the same with the CLI or the API.